Please find below the agenda of the Harvest Imaging Forum 2019. Do not pay too much attention on the timing, because the forum will run in 2 parallel sessions. The (indicative) timing shown is valid for the first session, the second one will get another timing.
| AGENDA | ||
| Harvest Imaging Forum : | ||
| On-Chip Feature Extraction & Direct ToF 3D Imaging | ||
| Day 1 | 9:00 – 9:15 | Introduction to the forum |
| 9:15 – 10:45 | 1. Basics of Image Sensors 1-1 3T/4T pixels 1-2 Column CDS / Column ADC / Column Circuits 1-3 Signal processing: In-pixel / In-column / On-chip 1-4 Global shutter 1-5 3D stacking / BSI image sensors |
|
| 10:45 – 11:15 | Break | |
| 11:15 – 12:45 | 2. Overview of Functional Imaging 2-1 High-speed imagers 2-2 Wide dynamic range imagers 2-3 Event driven imagers 2-4 3D range finding 2-5 Angular sensitive imagers |
|
| 12:45 – 14:00 | Lunch break | |
| 14:00 – 15:30 | 3. Features to extract 3-1 ROI / Illumination position detection 3-2 Edge detection / edge direction detection 3-3 Gravity center detection 3-4 Motion detection 3-5 Optical flow detection 3-6 Time detection / time stamping 3-7 Event detection |
|
| 15:30 – 16:00 | Break | |
| 16:00 – 17:30 | 4. Examples of Functional Image Sensors for 3D range finding 4-1 In-pixel / Column parallel Position detection circuits 4-2 In-pixel / row parallel demodulation circuits 4-3 Lock-in pixels |
|
| 19:00 – 20:30 | Dinner | |
| Day 2 | 9:00 – 10:30 | 1. Introduction 1-1 Markets and applications of 3D image sensors 1-2 Brief overview of 3D imaging techniques 1-3 Time-of-Flight principle 1-4 Indirect and direct ToF 1-5 Detector technologies 1-6 Which technology for which application |
| 10:30 – 11:00 | Break | |
| 11:00 – 12:30 | 2. Direct Time-of-Flight Modelling 2-1 System level considerations/optical power budget 2-2 Ideal building blocks 2-3 DToF system modelling 2-4 Performance parameters 2-5 Algorithms 2-6 Comparison with IToF |
|
| 12:30 – 13:45 | Lunch break | |
| 13:45 – 15:15 | 3. Single-Photon Avalanche Diodes 3-1 What is a SPAD: operating principle 3-2 Control and processing electronics for SPADs4) 3-3 State of the art SPAD technologies 4. DToF Sensor architectures |
|
| 15:15 – 15:45 | Break | |
| 15:45 – 17:15 | 5. 3D Image Sensors Systems 5-1 Illumination sources 5-2 Background light rejection 5-3 Algorithms and data processing 5-4 Characterization of a DToF 3D camera 5-5 Laser eye-safety considerations |
|
| 17:15 – 17:30 | Closure of the forum | |
Albert, 14-11-2019.